Skip to main content

Paulin® Papco® 073-602 Partial Threaded Hex Head Cap Screw, 1/2 in, 7-1/2 in L Under Head, 5 Grade, Medium Carbon Steel, Bare Metal

Paulin_073_305.jpg

Description

Paulin® Papco® Hex Head Cap Screw, Partial Threaded, Series: 073, Measurement System: Imperial, 1/2 in Thread, 7-1/2 in Length Under Head, 5 Grade, Medium Carbon Steel, Bare Metal, UNC Thread, 3/4 in W x 5/16 in H Head, Hex Head, 120000 psi Tensile Strength, Material Specification: ASME B18.2.1-1996, SAE J429, 1-1/2 in Minimum Thread Length, C25 to C34 Rockwell Hardness

Specifications

Diameter - Thread Size 1/2 in
Finish Bare Metal
Grade 5
Hardness C25 to C34 Rockwell
Head Size 3/4 in W x 5/16 in H
Head Type Hex
Length Under Head 7-1/2 in
Material Medium Carbon Steel
Material Specification ASME B18.2.1-1996, SAE J429
Measurement System Imperial
Minimum Thread Length 1-1/2 in
Series 073
Tensile Strength 120000 psi
Thread Type UNC
Type Partial Threaded

Features

  • Papco® grade 5 cap screws, identified by the three radial bar head marking, are made of medium carbon steel, quenched and tempered for higher tensile strength and holding power
  • Double heat treated
  • Medium carbon steel quenched and tempered C: 0.28 to 0.55, P: 0.025 maximum, S: 0.025 maximum
  • For studs only, sulfur content may be 0.13% maximum
  • There shall be a sufficient hardenability to ensure a microstructure consisting of approximately 90% martensite in the core of threaded sections of the fasteners after hardening and quenching and before tempering

Recently Viewed Items

Loading recently viewed products...
Loading product details...